JEDEC Announces DDR5 With Massively Better Speeds

The JEDEC Solid State Technology Association has made a major announcement marking one of the most important milestones in computer memory development. The firm has unveiled the final specification for its next mainstream memory standard, the DDR5 SDRAM.

The new generation of DDR RAMs will once again push the limits of DDR memory, doubling peak memory and significantly enhancing memory sizes as well. As always, it will arrive for servers first and desktops later.

With this development, the maximum memory speeds that reach at least 6.4Gbps and the capacity for a single LRDIMM will eventually reach 2TB. Of course, there are several smaller upgrades across the board too such as better voltage regulators etc. Here is a comparison with previous generations.

JEDEC DDR Generations
Max Die Density 64 Gbit 16 Gbit 4 Gbit 32 Gbit
Max UDIMM Size 128 GB 32 GB 8 GB N/A
Max Data Rate 6.4 Gbps 3.2 Gbps 1.6 Gbps 6.4Gbps
Channels 2 1 1 1
Width (Non-ECC) 64-bits (2×32) 64-bits 64-bits 16-bits
(Per Group)
4 4 8 16
Bank Groups 8/4 4/2 1 4
Burst Length BL16 BL8 BL8 BL16
Voltage (Vdd) 1.1v 1.2v 1.5v 1.05v
Vddq 1.1v 1.2v 1.5v 0.5v


DDR5 will allow individual memory chips to reach 64Gbit density, which is 4 times higher than DDR4. The aforementioned max data rate will reach 6.4 Gbps, which is twice as much as DDR4. We will also eventually start seeing DIMM capacities reach 128GB for a typical dual-rank configuration.

As always, there are a plethora of other changes, improvements, and many technical details as well. If you want to get into those, we recommend heading over to AnandTech for a more detailed breakdown.

The adoption of DDR5 memory is not expected until 2021. As mentioned before, it will feature in servers before eventually arriving at desktop PCs.

You might also like
Leave A Reply

Your email address will not be published.