How To Choose The Right Amount And Type Of RAM For Your PC

We all know very well that the RAM is one of the most important components in the performance of our PC or computer, there will be many users who choose to extend the amount of RAM in their PC, simply to gain more speed. However, the fact is that there are certain doubts that can simply arise at that time, like the amount and type of memory that we need. Next, we will show some recommendations to take into account while choosing the amount and type of RAM for your PC.

How To Choose The Right Amount And Type Of RAM For Your PC

The RAM is one of the most important components in the performance of our PC or computer, there will be many users who choose to extend the amount of RAM in their PC, simply to gain more speed.

However, the fact is that there are certain doubts that can simply arise at that time, like the amount and type of memory that we need. Next, we will show some recommendations to take into account while choosing the amount and type of RAM for your PC.

The amount of RAM you need for your PC

As for the amount of RAM that we can add to our PC simply depends on many aspects, hence, we must have to fix before rushing and buying more or less memory that we need. Undoubtedly, the use that we give to our computer is a fact to be taken into account, since it is not the same to use a PC to play or run applications that move large amounts of data if we only use it to browse the internet.

Currently, 4GB of RAM is the minimum that computers should have, offering in most cases a balance between cost and performance. To perform all kinds of daily tasks will be more than enough, we can even make use of certain photo and video editing applications without any problems, however, when we need to treat images in high resolution or work with a 3D designing software, then it is better to have 8GB of RAM.

With this amount of RAM in our computer, we will be able to enjoy a quite comfortable user experience, even if we are one of those who has several programs at the same time open or we like to play some of the most popular games of the moment on the PC.

In case if you have a high-end computer, although the logical thing is that it already has a good amount of RAM, we can simply install up to 16GB of RAM, which will allow us to work with much more ease. Above all, if we work on 3D design and if we make use of several applications that require moving a large amount of information quickly. We can simply count on more RAM on the computer.

How to choose the type of RAM you need for your PC

Once we are clear about the amount of RAM that we want for our PC or computer, we must be sure about the type of memory we need. First of all, we must ensure that it is compatible with our license plate, of course, I am talking about the motherboard, as if it is not, it will simply not recognize it and, of course, not work.

If what we want is to expand the amount of RAM that we already have installed on the PC, we must also make sure they are of the same type. As far as format is concerned, we must distinguish between SO-DIMM for laptops and DIMMs for desktops. Subsequently, the types of RAM can be classified into DDR, DDR2, DDR3, and DDR4, the latter being is the one which is used in all modern computers.

DDR stands for Double Data Rate, therefore, they are modules composed by synchronous memories or SDRAM, available in DIMM encapsulation, that simply allows the transfer of data through two channels in the same clock cycle. As DDR2 is the evolution of DDR-SDRAM memory, while DDR3 is the evolution of DDR2 and the same goes for DDR4.

The differences between these generations or types of RAM memory is each of the most modern types have been offering a greater number of contacts, higher speeds and a reduction in consumption and voltage. In this way, the first thing we need to know is the type of RAM that we currently have installed on the PC.

If we do not know or do not have the invoice or specifications of the device, then we can simply use some third-party software such as CPU-Z simply to know the information. In this way, we can know the type (DDRX), as well as the speeds, frequency, latency, and voltage, since we must buy a memory that offers data similar to the one we already have installed if we do not want to waste it.

As far as the manufacturer is concerned, there is no problem in mixing RAM memories from different manufacturers, as long as we respect the type and characteristics of the memory. In this regard, the manufacturer Corsair, one of the benchmarks in terms of RAM and storage units, offers a lot of RAM modules of different types and features on its website.

In addition, from there we can find RAM memory compatible with our motherboard, as well as modules of a certain format and type, speeds, frequency, latency and voltage determined by the filters offered by Corsair from its website.

So, what do you think about this? Simply share all your views and thoughts in the comment section below. And if you liked this post then simply do not forget to share this post with your friends and family.